BMW servicing, BMW tuning, BMW remapping, ECU remapping, BMW remap, Condition Based Servicing, BMW oil service, BMW inspection 1, BMW inspection 2, E46 M3, E46 M3 boot floor repair, M3 floor crack

Uprated Vanos Seal & Bolt Sets - E36 M3 & M3 Evolution, Z4M (S50B32)

Our uprated E36 M3 vanos seal & bolt sets were the first to be developed in the UK & have now sold worldwide! A best seller to replace the outdated NBR seals found in original units that suffer temperature degradation & poor chemical resistance causing leaks & loss of performance.  Manufactured from Viton, a material widely used in military & aviation applications, these are a cost-effective DIY-upgrade for your M3. Comes with all new fixing bolts in high-tensile zinc-plated steel to prevent bolt head failure - a common issue with the original BMW 8.8 versions.

Genuine BMW Vanos

filter - E36 M3

Genuine brand new vanos oil filter screw & washer.  Often overlooked as a service item, this fine mesh screen can clog & starve the vanos unit of oil flow. Quick & easy to change, get yours here!  £18.50 each inc free UK P&P

Iridium Uprated Vanos

Main Unit Body-to -

Cylinder-Head Seal set

Uprated Viton o-rings to fit between the vanos unit body & the cylinder head face. £21.50/set inc. free UK P&P
Service | Repairs | Performance | Diagnostics | M-Power Specialists
Please Note... All our vanos kits are assembled-to-order from our workshop stock so please allow up to 3 working days for packing & despatch. These kits ship to the UK ONLY - no overseas orders accepted.
Choose Engine (prices inc. UK P&P)
Engine:
Opening Hours Monday - Thursday 08:30-17:30 Friday 08:30 - 16:30 Saturday morning - BY PRIOR APPOINTMENT ONLY

Iridium Uprated Viton

Seal & Bolt Set

Our best selling vanos solenoid seal upgrade kit.  Now in its' fourth generation, this is a fantastic replacement & upgrade for the standard BMW NBR (nitrile) rubber seals. Comes with a full 12.9 high- tensile bolt set to remove the issue of bolt head failure & subsequent catastrophic oil loss that the standard ones suffered from. Does NOT contain the internal piston seals. Contains: 8 x high-tensile solenoid cover  bolts & washers (4 for 3.0ltr) 6 x high-tensile inlet cam- cover bolts & washers 2 solenoid cover gaskets (genuine BMW - 1 for 3.0ltr)  1 x viton inlet cam cap seal & 1 x viton exhaust cam cap (no exhaust on 3.0ltr) 8 x viton solenoid seals (4 for 3.0ltr) 2 x viton pressure-relief valve seals 3.0ltr Non-Evo, £44.99/set 3.2ltr Evo model, £57.99/set inc. free UK P&P